Okay, here’s my blog post about installing the cushioned volleyball parquet flooring:

Alright, guys, so I finally got around to tackling that project I’ve been putting off – installing new flooring in my home gym. I’m a huge volleyball nut, and I wanted something that would be good for practice but also look pretty slick. I ended up going with this cushioned parquet system, and let me tell you, it was a bit of a journey.

Getting Started

First things first, I had to clear out the old flooring. This was just some old, beat-up linoleum, so it wasn’t too bad. I just grabbed a pry bar and went to town, ripping that stuff up. Underneath was just the concrete subfloor, which was thankfully pretty level. If it wasn’t, I would have had to use some self-leveling compound, which would have added another day to the project. Lucky me, I guess!

Prepping the Subfloor

Next, I gave the concrete a good sweep and vacuum to get rid of any dust or debris. You want a nice, clean surface for the new flooring to adhere to. Then, I rolled out this underlayment. it is a moisture barrier and helps with sound dampening. I taped the seams together with some heavy-duty tape to keep it all secure.

Laying the Cushions

This is where things got interesting. The flooring system I chose has these interlocking plastic grids that form the base.

So,I started snapping those grids together. It went pretty quickly once I got the hang of * make a satisfying “click” when they connect, so you know they’re secure. I just worked my way across the room, making sure to leave a small gap around the edges for expansion and contraction.

The Wooden Surface

Once the cushion layer was down, it was time for the actual wood. These were pre-finished parquet squares, which was a huge plus. No sanding or staining needed! They had this tongue-and-groove system, so they fit together pretty snugly.
This part was a bit tedious., I won’t lie. I used a rubber mallet to gently tap them into place, making sure each piece was flush with the others. Slow and steady wins the race, right?

Finishing Touches

After all the parquet squares were in, I installed some baseboards around the perimeter of the room to cover up that expansion gap. I just used some finishing nails and a hammer – nothing fancy.

And that was pretty much it! I gave the floor a final sweep, stood back, and admired my handiwork.

The Final Result

I’m pretty stoked with how it turned out. The floor looks great, and it feels amazing underfoot. It’s got just the right amount of give for volleyball practice, and it’s definitely an upgrade from that old linoleum.

It was a solid weekend project, and I’m glad I took the time to do it myself. Saved some money, got a little exercise, and now I’ve got a sweet new volleyball court in my basement. Win-win-win!

if you have any question,just ask me.