Alright, folks, let’s dive into my little project of laying down some batten volleyball parquet portable wooden flooring. I’ve always been a hands-on kind of guy, and the idea of having a decent, somewhat portable volleyball court in my backyard has been kicking around in my head for a while. So, I finally decided to bite the bullet and give it a shot.

Getting Started

First things first, I needed to figure out the space. I measured out the area in my backyard, making sure I had enough room for the court and some buffer zone around it. Once I had the dimensions down, I went to a local store that has all of this. It’s nothing professional, just a personal exercise.

The Materials

I picked up a bunch of wooden battens – these are basically the long, flat pieces of wood that form the frame. I also grabbed the parquet flooring itself. I went for a simple, interlocking design, figuring it would be easier to assemble and disassemble if I ever needed to move it. I grabbed some screws, wood glue, and a few other basics while I was there.

Building the Frame

This was probably the most time-consuming part. I started by laying out the battens to create the perimeter of the court. I used wood glue and screws to secure them together, making sure everything was nice and square. I’m no carpenter, but I managed to get it pretty darn level. Then, I added more battens across the middle to provide support for the parquet flooring. Think of it like building a really big, flat, wooden grid.

It is important to leave some space between each board, as the wood can expand and contract over time.

Laying the Parquet

Once the frame was solid, laying the parquet was actually kind of fun. The pieces I got just clicked together, so it was like putting together a giant puzzle. I started from one corner and worked my way across, making sure each piece was snug against the next. I used a rubber mallet to gently tap them into place – didn’t want to damage anything.

The Finishing Touches

After all the parquet was down, I gave the whole thing a good once-over, checking for any loose pieces or uneven spots. I added a bit of extra support in a few places where I thought it needed it. And that was pretty much it! I swept it clean, admired my handiwork, and grabbed my volleyball.

The Result

Honestly, it turned out better than I expected. It’s not perfect, but it’s definitely sturdy enough for some casual volleyball games. The fact that I can technically take it apart and move it is a bonus. Plus, I learned a ton in the process. There’s something really satisfying about building something with your own two hands, even if it’s just a slightly wonky, backyard volleyball court.

If you have basic carpentry skills, and a lot of patience, you can easily do this in a weekend. It’s very rewarding, and in the end you have a space to practice your favorite sport, in this case, volleyball.